Want To Go Rock Climbing? Just Take This Chainlink 4×4 Truck!

Is it possible to go to any lengths just by simply driving in a 4×4 Truck? These guys surely give us the answer. They have designed and constructed a complete BEAST. Weighting at over 5900 LB and having its body constructed of steel tubing with 39.5″ tires, this 4×4 truck will grab your attention.

Rock Climbing Chainlink 4x4 Truck 7

Going up or down the mountain, or even completely vertically, is an easy task. Each tire can go at about 7 feet of up or down motion. The steering box is mounted in front of the axle below the driver and the steering is linked through the swing arms.

The engine is fuel injected Ford 5.0 V8 taken out of a 1993 Cobra Mustang and it has a C4 transmission out of an early Bronco. In the center running chain gears on the ends, below the driver, a 9″ with 5.38 gears and ARB air locker is mounted. Its swing arms are hydraulically controlled. You can control them either individually or together. There is also a shock suspension and coil spring. Huge chains are running inside the swing arms. They turn hummer gear reduction hubs at each wheel, with a ratio of 2:1. Is there any other beast similar to this one you can think of?

Before you go, watch this Jeep Cherokee XJ fighting the rocks as a boss!